0
Kel-Tec P17 Frame Mounted Red Dot Mount and Bolt Stop (Kel-Rod Mod) / Rimfire
Image 1 of Kel-Tec P17 Frame Mounted Red Dot Mount and Bolt Stop (Kel-Rod Mod)
Image 2 of Kel-Tec P17 Frame Mounted Red Dot Mount and Bolt Stop (Kel-Rod Mod)
Image 3 of Kel-Tec P17 Frame Mounted Red Dot Mount and Bolt Stop (Kel-Rod Mod)
Image 4 of Kel-Tec P17 Frame Mounted Red Dot Mount and Bolt Stop (Kel-Rod Mod)
Image 5 of Kel-Tec P17 Frame Mounted Red Dot Mount and Bolt Stop (Kel-Rod Mod)
1 of 5

Kel-Tec P17 Frame Mounted Red Dot Mount and Bolt Stop (Kel-Rod Mod)

$20.00

This can accommodate RMSC and RMR optics that utilize M4 screws. If your optic didn't come with M4 screws (most do) then they can be found at the hardware store for under a buck.

Installation is pretty easy. Remove the top slide cover and set aside. Install the included pull tab with the same screws you removed from the slide cover. Then remove the two rear screws on each side of the frame. slide on the optic mount, it will snap into place. Then you will use the screws I have included for you to screw the optic mount in place. The longer screws go in front and the smaller in the back. Here is a link to an installation video. https://youtu.be/hrBHttAosBM

To use the bolt stop feature I recommend only using subsonic ammo as this is what it is made for. I got really good performance out of the CCI quiet at 710 FPS. The hole is 3mm and I just found an extra allen key laying around that worked fine. I don't include an allen key or anything, you will have to source yourself.